FAQs
To do so:
- Disconnect the VelocityOne Flight from the console/PC it is being used with.
- Hold the Menu and View buttons (highlighted in blue in the image below) down at the same time. ...
- Connect the VelocityOne Flight back to the console/PC.
Calibrating the Controls
- Push the yoke full forward, and turn it full right.
- While holding full right, pull the yoke full back.
- While holding full back, turn the yoke full left.
- While holding full left, push the yoke full forward.
- While holding full forward, turn the yoke full right.
- Repeat above steps (1x).*
Press and hold down all ABXY face buttons; at the same time, connect the Type-A end to the PC or Xbox. Keep holding the buttons down after the controller is plugged in. Do not release the buttons until all of the LEDs on the controller illuminate. Once all of the LEDs illuminate, release those buttons.
How do I reset my headset to factory settings? ›
Turn off your headset. Hold the power and volume (-) button on your headset down simultaneously until the boot screen loads on your headset. Use the volume buttons on your headset to highlight Factory Reset and press the power button. Use the volume buttons on your headset to highlight Yes and press the power button.
How to do a hard reset on wireless headphones? ›
With the product turned on and not connected with a Bluetooth device, press and hold (about 6 seconds) the power supply/control button and volume buttons (+/-) at the same time. After the indicator lamp lights in red, the product will restart, and the reset will be complete.
How do I update my velocity one flight stick on Xbox? ›
To update the firmware:
- Download the VelocityOne Flightstick Companion App on your Xbox or Windows PC.
- Plug the Flightstick in to the Xbox/PC. ...
- Launch the app, and follow the on-screen instructions to perform that firmware update.
On the back of your controller, you will find a tiny hole – the reset button is inside this hole. Use a small, unfolded paper clip (or something similar) to press and hold the reset button for at least five seconds.
What is velocity calibration? ›
In velocity calibration, the gauge measures the speed of sound in a reference sample of the test material and then stores that value for use in calculating thickness from measured time intervals.
How do I reset my controller calibration? ›
How to Reset Controller Calibration to Default Settings on Windows
- Press Win + R to open the Run dialog box.
- Type joy. cpl in the box and press Enter to open the game controller settings.
- Select your controller and click the Properties button.
- Under the Settings tab, click the Reset to Default button.
- Click OK.
If your view or sighting has become misaligned, calibrating the motion controls may fix the issue. You can do this either in-game or via your console's settings.
Press the controller's Input Focus Button (“+”), then press Y to open the Main Menu. Press right on the D-Pad to go to SYSTEM and press A. Next, press right on the D-Pad until you get to CALIBRATION, and press A. Here, you will have options to calibrate the STICKS and the TRIGGERS.
How do you hard reset a Turtle Beach headset? ›
To power off and hard reset the headset, press and hold the (Mute) button for 15 seconds. You may hear a sound as the headset turns off completely and the remaining power in its circuits discharges. Once you're done, connect the transmitter's USB power cable, then power on the headset.
What does a hard reset do on a controller? ›
A hard reset will delete the existing controller database and reload it with new information in the controller database.
How do you fix an unresponsive Turtle Beach headset? ›
Open the Turtle Beach Audio Hub (for Windows or MacOS). Connect the USB Charge Cable to the Headset's USB Charge/Update port. (With the Headset powered OFF) Hold down the Superhuman Hearing™ button while connecting the USB Cable into your computer. The Audio Hub will prompt you to update the headset.
How to factory reset Turtle Beach Elite 800? ›
To power off and hard reset the headset, press and hold the (Mute) button for 15 seconds. You may hear a sound as the headset turns off completely and the remaining power in its circuits discharges. Once you're done, connect the transmitter's USB power cable, then power on the headset.
How to reset Turtle Beach Stealth 500? ›
To do this: 1) Power the headset off by holding the power button on the headset for 3 seconds. Note: if the headset is not responding, hold the Mic Mute Button down for 10 seconds.
